
Explanation to different GSD versions:

Standard version: 	To be used as standard when PROFIenergy functionality is
                     not implemented in the application.


PROFIenergy version:	Can be used as an example file when PROFIenergy is
                     implemented in the application to the Anybus
			            module. PROFIenergy is not supported by the ABS module by
			            default. When PROFIenergy is implemented and this file is
			            used, it is a minimum demand that the Device ID is changed.



DAP (Device Access Point) version information (common to both files):

"RT":
This DAP can be used for all firmware versions of the Anybus-S PIR Copper
physical media. The PROFINET IO Controller need to support at least PROFINET IO
specification 2.0.
The file is fully backwards compatible down to firmware version 3.23, for
previous firmware versions it is recommended that the GSD released for that
firmware version is used.

"RT FO":
This DAP can be used for all firmware versions of the Anybus-S PIR Fiber
optical physical media. The PROFINET IO Controller need to support at least
PROFINET IO specification 2.0.
The file is fully backwards compatible down to firmware version 3.23, for
previous firmware versions it is recommended that the GSD released for that
firmware version is used.

"RT" in Migration folder:
This DAP can be used for all firmware versions of the Anybus-S PIR (both fiber optic and copper physical media).
This DAP shall be used only when the PROFINET IO Controller does not support "extended PROFINET diagnostics"
(that is, it supports only PROFINET IO specification v1.0).

"RT (FW V>=2.00)":
This DAP can be used for firmware version later than or equal to V2.00 of the Anybus-S PIR (both fiber optic
and copper physical media).
This DAP shall be used only when the PROFINET IO Controller does not support "extended PROFINET diagnostics"
(that is, it supports only PROFINET IO specification v1.0).
